Bioprocess System Accessories
Chemglass Life Sciences PTFE Filter, 150mm, 30 Micron
PTFE Filter, 150mm, 30 Micron. 150C Max. Temp. Limit for Filter Base. Please Note: Filter Reactors are for Vacuum/Gravity Filtration Use Only
Bellco Glass, Inc. Pitch Blade Assembly , 7L
Stainless steel pitch blade impeller 7l MADE IN THE USA 316l stainless steel Ra 32 finish or better
Bellco Glass, Inc. Straight Harvesting Tube,14L 1/4" OD - Ra 32・Finish
Straight Harvesting Tube for Omni Vessels. Material: 316l stainless steal with ra finish of 32 inch or better, inside and out. MADE IN THE USA. Dimensions: od x id:1/4" x 5/32" x 14" long
Bellco Glass, Inc. 3L Insct Sys P/C MicroCarrier ,230V
Designed for growing insect cell cultures such as SF9 and SF21 cells. The system comes completewith all accessories needed to grow your insect culture line for expression. MADE IN THE USA Includes:–Digital 5-Position Magnetic Stirrer 230V–1965-03000 Micro-Carrier Spinner Flask Complete 3L–1965-20003R 2-Port Assembly 3L–7808-10004 Gas Blending Stand–Air Supply Pump 230V–7800-10050 Silicone Tubing 1/4” ID
Bellco Glass, Inc. Large Flange Stainless Steel Clamp, 8 OD "
200 mm SST large flange headplate clamp fits headplates, 5 liter thru 36 liter vessels. MADE IN THE USA. Corrosion resistant 316l stainless steel Includes red silicone o-ring and 200mm t-bolt clamp
Bellco Glass, Inc. Bellco Heating Blanket,115V-36L 1200 Watts
Heating blankets are designed to be used with a temperature controller and rtd temperature sensor for heating media inside a vessel to temperature. MADE IN THE USA. Male IEC connector for use with temperature controllersHeating at 5 watts/sq.in.Flask size: 36lWatts: 1200 **not for celltrol** use 600 watt blanket (1964-57365)Dimension (in.): 5 x 48 3/4"3 latches6ft cord (18-2) with cj14 plugCaution: vessel must be stirred when heating blanket is in operation
Bellco Glass, Inc. Ring Sparger, 15L For 15L Bioreactor
316 l stainless steelElectropolish finish of 32ra or betterFor 18mm port in headplateLength, ,375" odInsertion length, 16.364"(16) 0.063 holes. MADE IN THE USA
Sanisure Inc Closed System Graduated Cylinders forVolumetric Transfer
The SaniSure Closed System Graduated Cylinders provide the ability to make volumetric additionsfrom a closed system design directly to the process. The vented sealing plug on top of the cylinder allows full dispensing through the bottom port. These closed systems can be welded in-processthrough the attached weldable TPE tubing and be pumped out of the cylinder through a peristaltic pump utilizing the platinum cured silicone tubing segment. These pre-engineered solutions are available in 250mL, 500mL, 1L, and 2L volumes. SaniSure also offers full customization capabilities to meet your specific application needs
Biosurface Technologies Corp PVC SQUARE COUPON
PVC SQUARE COUPON. This item has a minimum order quantity of 6 per supplier requirements.
Accuflow Systems Biosimplex Spinner Flask Closure Assembly 8l 3 Port 10/pk
Biosimplex Spinner Flask Closure Assembly 8l 3 Port 10/pk
REPLIGEN CORPORATION Repligen XCell ATF 2 Device, High Cell Viability, Gentle Diaphragm Pumping, 1 unit
The Repligen XCell ATF 2 Single-use Device is a high-performance cell retention solution that supports high cell density and viability in bioprocessing. It employs Alternating Tangential Flow (ATF) technology to minimize shear stress, enhancing cell performance. This ready-to-use device is scalable for processes up to 5000 L, featuring integrated tube sets and aseptic connectors that allow seamless transfers to larger systems, differentiating it with its ease of use and effective design.
Chemglass Life Sciences 3-Port Harvest Tube Assembly for 6L VSA Vessels, Complete
Our probe holders are designed to secure pH and DO probes into 45mm vertical sidearm vessels.Includes thermoplastic, polyester cap and silicone gasket.This assembly is designed to hold an Ingold pH or DO electrode securely in place in your cell culture vessel via the 45mm sidearm.It consists of: red high temperature 45mm screw cap, 316L SST probe holder with a Pg 13.5 thread, and a white silicone rubber liner. comes fully assembled for fast and easy set-up.
Chemglass Life Sciences 300mL ChemRxnHub Process System Complete with Glassware, Stand, and OHS 100 Advance Motor
ChemRxnHub™ process systems are complete with benchtop stand, overhead stirrer and glassware. Available with the optional manifold connection and heat transfer fluid draining system. The unique design of the ChemRxnHub™ support stand and clamping system allows for quick and easy installation/removal of glassware and fits into most benchtop hoods.
Chemglass Life Sciences 3-Port Harvest Tube Assembly for 8L VSA Vessels, Complete
Our probe holders are designed to secure pH and DO probes into 45mm vertical sidearm vessels.Includes thermoplastic, polyester cap and silicone gasket.This assembly is designed to hold an Ingold pH or DO electrode securely in place in your cell culture vessel via the 45mm sidearm.It consists of: red high temperature 45mm screw cap, 316L SST probe holder with a Pg 13.5 thread, and a white silicone rubber liner. comes fully assembled for fast and easy set-up.
Ace Glass, Inc. 2000mL pressure vessel body, one-piece, #25 center, (3) #15, (1)#7 side necks, round bottom
2000mL round bottom pressure vessel body. Vessel has a #25 Ace-Thred center neck, 3 #15 Ace-Thred side necks, and 1 #7 Ace-Thred side neck. Rated 45 PSI at 100C.